How to Select the Right Robot Joint Actuator: A Practical Engineering Guide

TL;DR: A step-by-step framework for engineers selecting robotic joint actuators — covering torque requirements, transmission type, communication protocol, and control interface. Includes downloadable spec comparison template.

The Problem: Too Many Options, Too Little Guidance

If you're building a robot arm, cobot, or humanoid and searching for actuators, you've probably noticed:

• Some suppliers list peak torque, others list continuous torque
• "Backdrivability" means different things to different manufacturers
• Communication protocols range from CANopen to EtherCAT to RS485, with no universal standard
• Price varies by 10x for seemingly similar specs

This guide gives you the decision framework I wish someone had given me when I started.

Step 1: Define Your Torque Requirements

The single most common mistake is using peak torque for sizing. Here's the correct approach:

Continuous Torque (T_cont)

This is what drives sustained operation. For a robot joint:

T_cont = m × g × L / (GR × η)

Where:

• m = link mass (kg)
• g = 9.81
• L = distance from joint to center of mass (m)
• GR = gear ratio
• η = transmission efficiency (~0.6–0.8 for harmonic drives, ~0.85–0.95 for planetary)

Peak Torque (T_peak)

This matters for acceleration and emergency stops. As a rule of thumb, design for:

T_peak = 1.5× to 2× T_cont

Why This Matters

If you size on peak torque, you'll end up with an actuator that's 2× heavier and 3× more expensive than needed — and the extra mass propagates upstream, requiring larger actuators in the base joints.

Step 2: Choose Your Transmission Type

Harmonic Drive

Best for: 6-DOF arms, cobots, surgical robots, semiconductor equipment

Planetary Gear

Best for: Mobile robots, AGVs, parallel robots, high-cycle pick-and-place

QDD (Quasi-Direct Drive)

Best for: Humanoid robots, exoskeletons, haptic devices

Step 3: Select Your Communication Protocol

This is often the most underestimated decision.

CANopen (CiA 402)

• Maturity: Extremely well-established
• Speed: Up to 1 Mbps
• Real-time: Good for up to 10 axes
• Tooling: Widespread — LinuxCNC, ROS2 CANopen packages
• Complexity: Simple wiring, differential pair

EtherCAT

• Maturity: Growing rapidly in robotics
• Speed: 100 Mbps
• Real-time: Sub-μs DC synchronization
• Tooling: SOEM, IgH, ROS2 EtherCAT drivers
• Complexity: Requires master PC with compatible NIC

RS485 / Modbus

• Maturity: Declining for new robotic applications
• Speed: Up to 10 Mbps
• Synchronization: None
• Best for: Simple positioning, not coordinated multi-axis

Recommendation: If your robot has more than 4 joints and requires coordinated motion, choose EtherCAT. For 1-4 axes with simpler profiles, CANopen is sufficient and easier to set up.

Step 4: Evaluate Control Modes

Make sure the actuator supports the control modes your application needs:

For ROS2 ros2_control integration, ensure CSP and CST modes are available and well-documented.

Step 5: Spec Template

Here's a 10-point spec checklist to send to any actuator supplier:

1. Continuous torque (Nm) at rated speed
2. Peak torque (Nm), duration limit
3. Backlash (arcmin or arcsec)
4. Reduction ratio
5. Communication protocols supported
6. Control modes (CiA 402 support)
7. Operating voltage and current (continuous / peak)
8. IP rating
9. Temperature range
10. CAD model availability

If a supplier can't provide clear answers for all 10, that's a red flag.

About the Author

I design and build robotic joint actuators for industrial and collaborative robots. Our ZHR series covers 1–91 Nm continuous torque with CANopen, EtherCAT, and RS485 options. Reach out through the robotics community — I'm happy to discuss your project requirements.

Have questions about selecting an actuator for your specific robot design? Drop them in the comments below.