Photo editing and color-accurate work have different requirements than gaming or media watching. The goal is accuracy — the image on screen should match what other calibrated displays will show and what prints will look like.
Panel Selection First
For serious color work, IPS or IPS-equivalent (Nano IPS, Fast IPS) panels are the minimum. VA panels have better contrast but uneven color across the screen at wide viewing angles. TN panels are not suitable for color work.
If you are using a gaming monitor for photo editing, you can still get good results — just be aware of the limitations.
Picture Mode
Use sRGB mode if your monitor has one. This constrains the panel to the sRGB color gamut and applies accurate gamma — the standard for most photography, web content, and print workflows that do not use wide gamut.
Do not use Gaming or Vivid modes. These expand saturation beyond the sRGB gamut and will cause your edits to look oversaturated on every other correctly calibrated display.
Color Temperature
6500K — this is D65, the standard white point for sRGB content. Use the Warm preset or adjust RGB manually to hit this. Many gaming monitors' Warm preset is actually closer to 6000K — if accuracy matters, a colorimeter (SpyderX, X-Rite i1Display) is the reliable way to verify.
Brightness
80–120 nits for photo editing in a controlled room environment. Too bright and shadow detail looks different on screen than it will in print or on other displays. Many professional calibration standards target 80–100 nits.
Contrast
Leave at the panel's native default. Do not adjust contrast manually for color work — it changes the gamma response.
Sharpness
Set to exactly center (50%) or the neutral default. Photo editing software handles sharpening in the application — added monitor-level sharpening distorts edge detail assessment.
Color Space / ICC Profile
If your monitor came with an ICC profile (check the manufacturer's support page) or you have calibrated it with a colorimeter, ensure it is loaded in Windows:
Display Settings → Advanced Display → Display adapter properties → Color Management → Profiles → Add the ICC file → Set as Default.
This allows color-managed applications (Lightroom, Photoshop, Capture One) to correctly map colors through your monitor's profile.
Gamma
The standard gamma for sRGB is 2.2. Most monitors default to this. Some gaming monitors ship with a lower gamma (1.8–2.0) for perceived brightness — this makes images look lighter than they should for editing. Check your monitor's gamma setting and set it to 2.2 or sRGB.
What to Do Without a Colorimeter
If calibration hardware is not available:
- Use the monitor's sRGB mode
- Set brightness to 100 nits if you can measure it, or dial it down until it feels comfortable in a dimly lit room
- Set color temperature to Warm
- Load any factory ICC profile from the manufacturer's site
This gets you reasonably accurate without spending on hardware.
Community Presets
BestSettingsFor.com has community presets for specific monitors filtered by Work purpose — useful for seeing what color settings other users of the same panel have found accurate for productivity and content creation.
