"Supports AMQP" covers a lot of ground. A broker that accepts a TCP connection on port 5671 and exchanges OPEN/BEGIN frames with the client technically speaks AMQP. So does a broker that handles hundreds of thousands of messages per second with full PeekLock semantics, dead-letter routing, and session state. When an emulator claims AMQP compatibility, the interesting question is how far that compatibility actually goes — and specifically, whether it is deep enough for a real message-processing framework to drive it.
This post is about what that means in practice, and why we know Topaz passes the test: because we got it wrong first and had to fix it.
The two layers of Service Bus compatibility
Most discussions of Azure Service Bus compatibility focus on the control plane: can you create namespaces, queues, and topics through ARM or the Azure CLI? That layer is important — it is what makes az servicebus queue create and azurerm_servicebus_queue work locally — but it is not the interesting layer for message-processing code.
The interesting layer is the AMQP data plane, and it breaks down into two sub-layers:
SDK compatibility — does the Azure Service Bus SDK connect, authenticate, send, and receive? This is the easier bar. The SDK connects through CBS (Claims-Based Security), opens a sender link for sending and a receiver link for receiving, and uses basic settled transfers for most operations. A passable emulator can get this right with a few hundred lines of AMQP link handling code.
Framework compatibility — does a message-processing framework like MassTransit, NServiceBus, or Rebus actually work on top of it? Frameworks drive a more complete subset of the AMQP specification. They open management links alongside receive links, use $management request-response to perform operations the SDK does not surface directly, expect unsettled transfers with explicit client-side settlement, and rely on correct credit replenishment to maintain throughput. These behaviors are not optional features — they are the normal operating path.
The gap between these two bars is larger than it looks.
What MassTransit actually does over AMQP
MassTransit's Azure Service Bus transport (MassTransit.Azure.ServiceBus.Core) uses the Azure SDK as its underlying client but adds a layer of messaging conventions on top. When a ReceiveEndpoint starts, it:
- Opens an AMQP session and a receiver link to the queue.
- Immediately opens a second link to
<queue>/$management— a request-response link used for management operations likecom.microsoft:update-dispositionandcom.microsoft:renew-lock. - Sends an AMQP
FLOWframe on the receiver link with initial link credit, indicating how many messages it is prepared to accept. - For every message it processes, sends a
DISPOSITIONframe to complete or abandon it, then expects the broker to update the session's delivery state and replenish credit.
Step 2 is where most partial AMQP implementations break down. The Azure Service Bus SDK does not surface queue-level $management directly to callers; it is an internal transport detail. The root $management link is handled by IRequestProcessor in most AMQP server implementations, but queue-scoped $management links are distinct — they attach to the queue's link processor, not the root processor. An emulator that routes all $management traffic to one handler will complete the CBS authentication but silently drop every queue management request, causing MassTransit's CompleteAsync to wait 60 seconds for a response that never arrives.
Step 4 is where the second class of failures appears. If the broker sends transfers as sender-settled (the settled bit set in the TRANSFER frame), the receiver never adds the delivery to its unsettled map. When MassTransit calls CompleteAsync, the SDK sees no pending delivery with that lock token, settlement happens locally without waiting for broker confirmation, and no DISPOSITION frame is sent. The broker never gets the acknowledgement it expects. Credit is consumed but never replenished. After the first message, the consumer stops receiving.
The bugs we found
Running MassTransit against an early version of Topaz exposed exactly these two failure modes.
Bug 1: Missing queue $management handler. Topaz already handled the root $management link for CBS token validation. Queue-scoped management links were being attached to the link processor without a handler. MassTransit's CompleteAsync calls timed out after 60 seconds with an amqp:internal-error.
The fix required intercepting ATTACH frames addressed to <anything>/$management inside LinkProcessor and routing them to a dedicated request-response endpoint — separate from the root management handler. On the sender side, the endpoint registers a request processor that reads the operation property from incoming application properties, builds the appropriate response (status code, correlation ID, operation-specific payload for com.microsoft:renew-lock), and sends it back on the paired response link.
Bug 2: Wrong management response property names. Once queue management requests were being answered, MassTransit's completion path started working — but threw amqp:internal-error (GeneralError) instead of returning. Decompiling the Azure SDK revealed the issue:
public static AmqpResponseStatusCode GetResponseStatusCode(this AmqpMessage responseMessage)
{
// reads responseMessage.ApplicationProperties.Map["statusCode"]
}
The initial management responses used status-code and status-description — the property names from the CBS specification. Service Bus management uses camelCase: statusCode and statusDescription. The SDK parsed the response, found no statusCode key, and treated the reply as a failure. Changing two string literals fixed it.
Bug 3: Sender-settled transfers. After the response key fix, the amqp:internal-error disappeared. But only the first message was consumed; the consumer then sat idle. Looking at the AMQP frame trace showed: one FLOW frame from the consumer link, one outgoing TRANSFER, then silence. No new FLOW frame, no credit replenishment.
The cause was in OutgoingLinkEndpoint. Topaz was setting the Settled property on outgoing deliveries to true — sender-settled transfers. The SDK never put the delivery in the unsettled map. CompleteAsync short-circuited. No DISPOSITION came back. No credit was restored. The fix was a one-line change:
// Before: sender-settled — credit consumed without replenishment
DeliverySettledProperty.SetValue(delivery, true);
// After: unsettled — let the receiver settle explicitly via DISPOSITION
DeliverySettledProperty.SetValue(delivery, false);
The consumer now receives a message, completes it, the broker sees the DISPOSITION and returns credit — standard PeekLock behaviour.
What the working example looks like
The Topaz.Examples.MassTransit project in the repository is a minimal ASP.NET Core app that starts a Topaz container via Testcontainers, provisions a Service Bus namespace and queue via the ARM API, and wires up MassTransit with a consumer:
builder.Services.AddMassTransit(x =>
{
x.AddConsumer<MessageConsumer>();
x.UsingAzureServiceBus((context, cfg) =>
{
cfg.Host(TopazResourceHelpers.GetServiceBusConnectionStringWithTls("sbnamespace"));
cfg.ReceiveEndpoint("sbqueue", e =>
{
e.ConfigureConsumer<MessageConsumer>(context);
e.PrefetchCount = 1;
});
});
});
MassTransit uses the TLS endpoint (port 5671) because it expects a standard Azure Service Bus connection string without UseDevelopmentEmulator=true. The non-TLS endpoint (port 8889) uses pre-settled receive-and-delete semantics — compatible with the Azure SDK's development emulator mode, but not with how MassTransit drives the receive path. For any framework that manages its own PeekLock cycle, the TLS endpoint is the right choice.
The worker sends one message per second. With the three bugs above fixed, the output is exactly one Message dispatched and one Message consumed per second — sustained indefinitely:
Message dispatched: {"Timestamp":"2026-05-26T09:14:35.86...","Message":"The time is ..."}
Message consumed: {"Timestamp":"2026-05-26T09:14:35.86...","Message":"The time is ..."}
Message dispatched: {"Timestamp":"2026-05-26T09:14:36.97...","Message":"The time is ..."}
Message consumed: {"Timestamp":"2026-05-26T09:14:36.97...","Message":"The time is ..."}
Why MassTransit support is a meaningful signal
MassTransit is not the only framework that exercises this part of the AMQP specification, but it is a widely-used one in the .NET ecosystem and it drives all three of the failure modes described above simultaneously. If Topaz runs MassTransit end-to-end, it means:
- Queue-scoped
$managementrequest-response is implemented and returns correct responses. - Transfers are unsettled, so receivers that manage their own settlement cycle work correctly.
- Credit replenishment is functional, so sustained throughput is possible without the consumer stalling.
NServiceBus's Azure Service Bus transport and any other library that implements the full PeekLock cycle over the Azure SDK should follow the same path.
What this does not guarantee: dead-letter queues, message sessions, topic subscription rules, and partitioned entities are not yet implemented. If your application depends on those features, the Azure Service Bus Emulator still has the advantage on that specific surface. Topaz's roadmap tracks when those features are coming.
The comparison with the Azure Service Bus Emulator
The Microsoft emulator ships as two Docker containers (emulator plus SQL Server), configures entities via a static config.json at startup, and does not implement the ARM control plane. What it does have is a more complete messaging feature set at the moment: dead-letter queues, message sessions, and topic filters work today.
The trade-off is concrete. If you need az servicebus queue create to work locally, Terraform azurerm_servicebus_queue to apply locally, or multiple namespaces in the same environment, the emulator cannot help — it has no ARM API. If you need dead-letter queues or message sessions, Topaz cannot yet help.
For teams in between — who need a real PeekLock consumer with sustained receive throughput and ARM-level infrastructure tooling in the same local process — Topaz is the current answer.
