Where to find TON validator data and yields in 2026

Validators are the backbone of any PoS blockchain, and TON is no exception. To assess the network’s health, evaluate centralisation risk or compute staking yield, you need to know where to get TON validator data and how to read it. This guide is a full overview of sources and metrics.

What a TON validator is and how it differs from Ethereum

On TON, a validator is a node selected through a proof-of-stake mechanism to produce blocks and sign finality. The main differences from Ethereum:

Fewer validators. TON has ~370 active, Ethereum has more than a million (counting all beacon-chain validators).
Higher stake bar. The technical minimum is 300,000 TON ($760k+ at $2.55/TON), the effective bar is around 1M TON. Ethereum is 32 ETH (~$80k+).
Election cycles. TON re-elects validators every ~18–20 hours; Ethereum doesn’t.
Shards. A TON validator can serve the masterchain or a shard chain. Important — masterchain validators carry more responsibility.

i
Key takeaway

TON has fewer validators and a higher entry bar than Ethereum. For decentralisation that’s worse; for finality speed, better. Every choice has trade-offs.

Where validator data lives

Source	What it gives
tonstat.com / validators	List of active validators, stake, uptime
tonscan.org / validators	Alternative explorer with cycle-level detail
tonviewer.com	Extended analytics for nodes and contracts
docs.ton.org / staking	Official documentation — cycle parameters
chorus.one / TON	Yield calculator from an institutional provider

For most tasks, tonstat.com and tonscan.org are enough. Extended per-cycle history needs you to either parse tonscan or run your own indexer based on the ton-blockchain GitHub.

Baseline numbers (May 2026)

From tonstat.com:

Active validators: 370
Combined stake: ~~845M TON (~~$2.15B at $2.55/TON)
Stake share of total supply: ~16% (845M out of 5.18B)
Liquid staking: ~96M TON in Tonstakers/Hipo/bemo
Direct staking (via nominator pools): ~750M TON
Inflation rate: 0.899% per year

For comparison: Ethereum staked ratio ~28%, Solana ~67%, Cardano ~62%. TON is relatively low on this metric — most TON freely circulates or sits idle.

Election cycle — how it works

From docs.ton.org and TON Foundation guidance:

Phase	Duration	What happens
Election	6–7 hours	Candidates submit bids and stake
Delay	2–3 hours	Technical buffer before start
Validation	18 hours	Active transaction validation
Hold	9 hours	Stake freeze, reward calculation

Full cycle — about 36–38 hours. After hold, rewards are distributed pro-rata. That means validator APY is more stable than DeFi-pool APY — it doesn’t depend on market conditions, only on inflation rate and the count of competing validators.

How “effective stake” is calculated

A technical detail people often confuse. If a candidate posts 310,000 TON, but the system parameter max_factor is 3 and the minimum stake in the active set is 100,000 TON, then effective stake = min(310,000, 3 × 100,000) = 300,000. The excess doesn’t help the bid. This is to discourage stake concentration.

Yield — claimed vs real

Solo validator

Full yield from block rewards and fees minus operational costs:

Gross APY: 6–8% (depends on inflation and your stake’s share of total).
Operational costs: bare-metal server with 64+ GB RAM, 8 cores, 1 TB NVMe — roughly $300–500/month.
Net APY: 5–7% with a 1M TON stake.

This is for experienced operators. For retail users, solo validation makes no sense — the entry barrier and operational load are too high.

Through nominator pools

Classic nominator pools are smart contracts where a validator “leases” the nominators’ stake. The minimum at top pools is usually 10,000 TON. Validator commission — 25–40% of rewards.

Nominator APY: 3.5–5% after commission.

Liquid staking — the retail path

Through Tonstakers, Hipo, bemo. Minimum — 1 TON, instant liquidity via an LST token (tsTON, hTON, stTON).

Protocol	TVL (TON)	APY ~	Distinctive feature
Tonstakers	50–70M	4–5%	TVL leader and biggest staker base (70k+)
Hipo	5–10M	4–4.5%	Auction-based validator selection
bemo	5–15M	4–4.5%	CertiK audit, incentive programs

The 2026 APY numbers are net of protocol commissions, but before taxes and any impermanent loss from using LST tokens in DeFi.

Want to try Tonstakers staking?

Tonstakers is the largest TON liquid staking protocol. 1 TON minimum, instant liquidity via tsTON.
→

Validator quality metrics

What to look at when delegating:

Uptime. Share of time online over the last 30 cycles. Below 95% — reason to think twice.
Slashing history. Has the validator been penalised. TON slashing is mild compared to ETH, but still telling.
Contact stack. Public website, Telegram channel, verified team — reduces vanish risk.
Stake size. Too large — concentration. Too small — risk of dropping out of the active set.
Commission. Norm 25–35%. Above 40% — overpayment without obvious benefit.

Network decentralisation metrics

What to look at when assessing TON’s overall health:

Nakamoto coefficient. How many validators must be compromised to control over 33% of stake. On TON in 2026 — around 25–35; normal for PoS networks.
Gini coefficient of stake. Distribution between validators. Lower = more even.
Node geography. TON validators concentrate in Europe and North America; per-country distribution data isn’t widely public.

How to compute yield yourself

Minimum formula:

APY = (stake_reward_per_cycle / stake) * (cycles_per_year)

Where cycles_per_year ≈ 240 (with cycles of 36–38 hours). Reward per cycle varies between 200 and 600 TON for a typical validator, depending on stake size.

For liquid staking it’s simpler — the protocol publishes historical APY for the last 7/30/90 days, and that already accounts for commissions.

!
What people often miss

Quoted APY is before tax in your jurisdiction. Staking income is typically taxable in most countries — verify the rate in yours, since on paper that drops your net yield by the local tax rate.